New Marco-Polo Güllefass / Slurry tanker / Tonne à lisier / Wóz 20 000 l manure container
Poniatowo
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 608 80...
Show
+48 608 800 049
Poland 
7,937 lb
Poland, Rzędziany
12,350 lb
Poland, Brzeg
14,110 lb
Poland, Brzeźnio
Germany, Hamburg
Poland, Słupia
Germany, De-91522 Ansbach
3,858 lb
Ukraine, Cherkasy
4,740 lb
Ukraine, Cherkasy
Netherlands, Goudriaan
Netherlands, Goudriaan
Germany, 27793 Wildeshausen
Netherlands, Goudriaan
Germany, 27793 Wildeshausen
Germany, Neuenkirchen-Vörden
Germany, De-49429 Visbek-Rechterfeld
23,810 lb
Denmark, Horsens
Netherlands, Goudriaan
Lithuania, Kužiai
19,750 lb
Netherlands, Saasveld
Standard Equipment:
Chassis:
Frame construction
D-50 drawbar eye, bolted
Rigid metal drawbar, powder-coated
Tractor coupling via lower transport hitch
Mechanically adjustable support leg
Running Gear:
Two-axle wheelset, rear axle steerable
Wheels 600/50-22.5
Pneumatic brakes, dual / single circuit
Tank:
Pressurized tank, 20,000 L capacity
Two internal reinforcement rings from channel steel
Hot-dip galvanized on both sides with additional passivation
Rear bottom hatch with Ø 600 mm manhole
Two 4″ glass sight glasses on front bottom hatch
Upper overflow nozzle at the highest point with overflow valve
Upper filling hatch Ø 210 mm
Anti-overflow baffle
Compressor:
Vacuum pump type 13500 MEC/M
Overfill protection:
Maximum vacuum: -0.94 bar
Two-ball overflow valve
Siphon shut-off valve with sight glass and drain valve
Safety Valves:
Safety valve (on compressor) 1 1/2″
Vacuum valve 1 1/2″
Pressure gauge D100, range -1/+1.5 bar
Oil recovery muffler
Tank Filling and Emptying System:
Nozzles and Valves:
Rear suction nozzle 6”, capped
Rear discharge nozzle 6”, 2-flange with hydraulic actuator; tilting discharge + connection for suction hose
Left side nozzle 6”, capped
Right side nozzle 6”, capped
Connection Accessories:
Galvanized quick coupling with flange for hose connection
Suction hose Ø 126 mm, length 6 m, with suction basket
Wide-angle slurry spreader, spreading width up to 14 m, version B
Electrical Installation:
Electrical and lighting installation according to traffic regulations, LED 12V + 1 beacon
Front white position lights
Rear lights with turn signals
Side reflectors – orange
Cable with 7-pin connector
Slow-moving vehicle triangular sign on rear bottom hatch
Nameplate, user manual, EC declaration / CE mark
Optional Paid Equipment:
Trailed hose applicators 3 - 18 m
Double-row tine applicators 4 - 6 m
Double-row disc applicators 3 - 4 m
Ski-type applicator 6 - 18 m
Three-point hitch for applicator mounting
Hydraulic mixer
Hydraulically adjustable drawbar
Hydraulic-pneumatic braking system, single axle
Hydraulic-pneumatic braking system, two axles
Turbo-filler
Suction arm + turbo-filler 8″
Immersion suction arm + turbo-filler 8″
Electrovalves + control panel
Hydraulic compressor control
Frame galvanization
Drawbar galvanization
Fender galvanization
K80 ball hitch
D-50 swivel eye hitch
Hydraulic support leg
Upper hatch with hydraulically operated funnel 6 - 8″
Side ladder with platform
Rear hatch hinged
Vertical filling indicator with 2″ valve
Single-color painting for galvanized tank
Suction hose 6″ Ø 150
Quick couplings 6″- 8″
D-60 hitch eye
K-80 hitch eye
D-50 swivel hitch eye
Manual support leg
Hydraulic support leg
Hand brake
Vacupress hoses 60 - 100 m
Flex hoses Ø 110 - 200 mm
8″ manual slide lever
Vacuum pumps 3,000 - 14,800 L/min
* Possibility of individual configuration