New Marco-Polo Gülletankwagen / Slurry tanker / Tonne à lisier 12 000 l liquid manure spreader
Poniatowo
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 608 80...
Show
+48 608 800 049
Poland 
19.69 ft
Poland, Bialystok, Podlaskie
Poland, Rzędziany
Poland, Cheåmno
Poland, Cheåmno
Poland, Cheåmno
Poland, Podegrodzie
39.37 ft
Poland, Wierzbno
39.37 ft
Poland, Wierzbno
Poland, Podegrodzie
Poland, Podegrodzie
Poland, Krzykosy
Poland, Krakow
18.37 ft
Ukraine, Odessa
68.9 ft
Poland, Zdany
32.81 ft
Ukraine, Bohuslav
19.69 ft
Ukraine, Odessa
Austria, At-3311 Zeillern
Poland, Kudowa Zdrój
19.69 ft
Germany, Meppen
19.69 ft
Ukraine
Chassis Construction:
Self-supporting structure
Removable D-50 drawbar eye
Rigid metal drawbar, powder-coated
Coupling to tractor via lower transport hitch
Mechanically adjustable support leg
Running Gear:
Two-axle wheel set, rear steering axle
Tyres 550/60-22.5
Pneumatic brakes, dual-circuit / single-circuit
Tank:
Pressure tank with 12,000 L capacity
Two internal reinforcing rings made of T-section steel
Hot-dip galvanized inside and outside with additional passivation
Rear end plate with Ø 600 mm manhole
Two 4" sight glasses on the front end plate
Upper overflow stub pipe at the highest point for overflow valve
Upper filling hatch Ø 210 mm
Anti-overflow baffle
Compressor
Vacuum pump type 9000 MEC/M
Overfill protection:
Maximum vacuum – 0.94 bar
Dual-ball overflow valve
Shut-off siphon valve with sight glass and drain valve
Safety Valves:
Safety valve (on compressor) 1 1/2″
Vacuum relief valve 1 1/2″
Pressure gauge D100, range –1 / +1.5 bar
Muffler–oil recovery system
Tank Filling and mptying System
Stubs and Valves
Rear suction stub 6", capped
Rear disc arge stub with 6″ double-flange gate valve and hydraulic cylinder; foldable discharge chute + suction hose connection
Left side stub 6", capped
Right side stub 6", capped
Connection Accessories:
Galvanized quick coupling with flange for hose connection
Suction hose Ø 126 mm (internal), 6 m long, with suction strainer
Wide-angle slurry spreader; working width up to 14 m, outlet version B
Electrical Installation
Road-legal electrical and lighting system, LED 12 V + 1 beacon
Front white position lights
Rear road lights with indicators
Side reflectors – orange
7-pin connector cable
Triangular slow-moving vehicle sign on rear end plate
Additional Equipment Included
Nameplate, user manual, EU declaration of conformity / CE marking
Optional Equipment (extra cost)
Trailing hose applicators 3–18 m
Two-row tine applicators 4–6 m
Two-row disc applicators 3–4 m
Skid/shoe applicators 6–18 m
Three-point hitch for applicator mounting
Hydraulic mixer
Hydraulically adjustable drawbar
Hydraulic-pneumatic brake system – one axle
Hydraulic-pneumatic brake system – two axles
Turbo-filler
Suction arm + turbo-filler 8"
Submersible suction arm + turbo-filler 8"
Solenoid valves + control panel
Hydraulic compressor control
Frame galvanization
Drawbar galvanization
Mudguard galvanization
K80 ball hitch
Rotating D-50 towing eye
Hydraulic support leg
Upper filling hatch with hydraulic opening 6–8"
Side ladder with platform
Rear end plate opening on hinge
Vertical fill-level indicator with 2" valve
Painting of galvanized tank in one colour
Suction hose 6" (Ø 150 mm)
Quick couplings 6"–8"
Tow eye D-60
Tow eye K-80
Tow eye D-50 rotating
Manual support leg
Hydraulic support leg
Hand brake
Vacupress hoses 60–100 m
Flex hoses Ø 110–200 m
Manual lever for 8" gate valve
Vacuum pumps 3000–14800 L/min
Custom configuration available.