New Peletto ShTP-4-2 grain auger
Poznań
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Poland 
Poland, Odolanów
Poland, Odolanów
Poland, Rzędziany
Poland, Odolanów, Wielkopolskie
Poland, Odolanów
Poland, Rzędziany
Poland, Rzędziany
Poland, Odolanów
Poland, Rzędziany
Poland, Odolanów
Poland, Rzędziany
Poland, Odolanów
Poland, Rzędziany
Poland, Rzędziany
Poland, Odolanów
Poland, Odolanów
Poland, Rzędziany
Using one dosing screw conveyor with two outlets instead of two separate units saves space, simplifies the feeding of animal feed, sawdust, and other bulk materials, and allows the entire system to be controlled from a single control panel.
The ShTP-4-2 model is equipped with a large 4 m³ hopper. Thanks to its design, the hopper can be filled using a loader, eliminating the need for manual loading. This reduces material spillage and speeds up the entire production process.
The specially designed shape of the hopper directs the material to the lower central section, where it enters the improved mixing system. The system is equipped with two counter-rotating ribbon agitators that evenly direct the material toward the two separate feeding outlets.
Each outlet can supply a separate pellet mill, making the ShTP-4-2 ideal for high-capacity production lines with two pellet mills operating simultaneously.
Key advantages:
Two separate outlets for simultaneous feeding of two pellet mills
Large 4 m³ hopper
Precise and uniform dosing of raw material
Hopper can be filled using a loader
Space-saving solution compared with two separate dosing screw conveyors
Control from a single control panel
Improved mixing system with two counter-rotating ribbon agitators
Stable material feeding to the pellet mills
Custom modifications available
The precise feeding system helps protect pellet mills against overload. Uniform raw material feeding allows the machines to operate within the specified load range, supporting high productivity and extending the service life of the equipment.
The use of a dosing screw conveyor with two outlets can also reduce the number of personnel required to operate the production line. A production line without a crusher and dosing unit can be operated by one operator.
Each outlet of the screw conveyor is equipped with a neodymium magnet to help protect the pellet mill dies from metal particles that may be present in the raw material. For raw materials containing larger foreign objects, the hopper can additionally be equipped with a screening grid.
Technical specifications:
Model: ShTP-4-2
Power supply: 400 V
Total motor power: 5.5 kW (4 kW + 2 × 0.75 kW)
Motor speed: 1,500 rpm
Capacity: up to 8,000 kg/h
Hopper capacity: 4 m³
Weight: 870 kg
Dimensions: 3,100 × 2,300 × 1,940 mm
Available modifications and configurations:
Dosing screw conveyor with two outlets and enlarged hopper
Modification designed to feed two 37 kW pellet mills.
Dosing screw conveyor with two outlets and reduced 1.5 m³ hopper
Modification designed to feed two pellet mills of up to 22 kW each.
Dosing screw conveyor with two outlets and funnel-shaped hopper
Modification designed for raw materials with reduced flowability.
Dosing screw conveyor with one outlet and enlarged hopper
Version designed for raw materials with low bulk density.
Net purchase with a valid VAT number.
Condition: New
Year of manufacture: 2025
The content of this advertisement is for informational purposes only and does not constitute a binding commercial offer within the meaning of the Civil Code or other applicable legal regulations. To make a purchase, please contact a sales representative to confirm the price, availability, and delivery time.